Andrew is the purchasing director of VIS Hydraulics in Italy and an old friend of AAK. He has cooperated with AAK for more than 4 years. One morning in October, I received an email from Andrew with the subject of \"a big trouble\". It is the first time that I received such an emotional email from Andrew. After reading, it turned out that the pressure of a hydraulic power system of their company was not enough, and the customer complained. The root of the problem is that the hydraulic threaded cartridge valve and hydraulic valve block does not match each other. The boss asked him to solve the problem within a month.
After communication, it was learned that the hydraulic threaded cartridge valve and the hydraulic valve block purchased by Andrew were not produced by the same manufacturer. Now both manufacturers do not admit that it was their own problem. The hydraulic threaded cartridge valve manufacturer said that the pressure of the hydraulic system was slow due to the processing accuracy of the hydraulic valve block, while the hydraulic valve block manufacturer said that the hydraulic threaded cartridge valve had leakage, resulting in insufficient flow. Andrew failed to communicate for several times and thought of AAK. During so many years of cooperation, only AAK hydraulic valve has no complaint. He hopes that AAK can help him find out what the problem is.
Andrew sent us the design drawings of the hydraulic threaded cartridge valve and hydraulic valve block. After analysis, AAK engineers found that the probability is that the design of the hydraulic valve block is unreasonable, the flow area of the through hole designed is not enough, and the direction and position of the oil inlet and outlet are not optimal, resulting in insufficient pressure of the whole hydraulic system. Andrew asked the hydraulic valve block manufacturer to design and produce, but the manufacturer needs 2 months to complete it, while the time given by his boss is only 1 month. Andrew asked the fastest time that AAK can finish the hydraulic valve block.
Our engineers are worried that there may be deviation if design the hydraulic valve block alone. If combined with the mapping of the valve, we can achieve 100% of the optimal design scheme. We recommended Andrew to send us the hydraulic threaded cartridge valve, too. After receiving it, the scanning analysis was carried out, and the design scheme was obtained 2 days later. After 20 days, the redesigned hydraulic valve block was sent to Andrew. After installation and commissioning, the pressure of the hydraulic system was normal. After the complaint was resolved, the boss was also happy and asked Andrew to purchase both the hydraulic threaded cartridge valve and hydraulic valve block from AAK in the future. Don\'t purchase them separately any more.
AAK engineers use professional automation studio version 7.0 software to automatically generate simulated hydraulic valve block of the threaded cartridge valve, scan and identify the external structure of each threaded cartridge valve, which can directly drag and generate 2D schematic diagram and 3D manifold design drawing in the most intuitive, fastest and simplest way, and then automatically generate the production drawing of hydraulic valve block through the created 2D diagram, with effective and accurate layout of each channel design. The generated data can be directly imported into the CNC machining center system. Compared with the normal design, it can effectively shorten the modification cycle, demonstrate with higher quality and improve the production process, so as to realize the high-efficiency design and processing of hydraulic valve block.
AAK hydraulic valve block is designed by using advanced 3D simulation design software. It can be designed and processed easily. Welcome to have a small try!
AAK HYDRAULIC VALVE (149) 2022-02-10
